Setting Cable Box Output Channel & Brand - JVC HR-S3800U Instructions Manual

16
EN
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET
1 2
4 5
7 8
0
1
2
Setting cable box output
channel & brand
After installation, set the cable box output's channel and
its brand correctly; otherwise, the Controller cannot
work correctly.
1
Turn on cable box
Select a channel other than channel 9 on your
cable box.
HR-S4800U/S3800U-EN01-20
3 4 6
2
REW FF
MENU
PLAY
SP EP
CH
VCR REC STOP/EJECT PAUSE
OK
3 – 5
3
2
7
6
9
4
3 4 6 7
3 – 5
16
INITIAL SETTINGS (cont.)
2
Access Main Menu screen on VCR
Press MENU.
3
Access Initial Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
"INITIAL SET", then press OK.
On the Remote:
Press SHUTTLE PLUS %fi to move the highlight
bar (arrow) to "INITIAL SET", then press OK or
SHUTTLE PLUS #.
4
Access Cable Box Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "CABLE BOX SET",
then press OK.
On the Remote:
Press SHUTTLE PLUS
%fi to move the highlight bar (arrow) to "CABLE
BOX SET", then press OK or SHUTTLE PLUS #.
5
Select cable box output channel
Your selection depends
on how your cable box
is connected to your
VCR.
c If your cable box is
connected to your
VCR's ANTENNA IN
terminal on the rear
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until the channel
number representing the cable box's output
(CH2 – CH9) appears on the screen.
c If your cable box is connected to your VCR's
AUDIO/VIDEO IN connectors on the front panel
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "ON F-1
(FRONT)" appears on the screen.
c If your cable box is connected to your VCR's
AUDIO/VIDEO IN connectors on the rear panel
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "ON L-1
(REAR)" appears on the screen.
c If you do not use a cable box
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "OFF" appears
on the screen.
00.1.31, 9:55 AM
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
= CABLE BOX SET
DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
CABLE BOX SET
OFF
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END