Tuner Setting; Setting Channels Automatically; Auto Channel Set - JVC HR-S9800U Instructions Manual

Tuner Setting

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
2 3
1 4
2 3
VCR TV CABLE/DBS
1
4
7
2 3
1 4
2 3
5 6
8 9
0
2 3

Setting channels automatically

— Auto Channel Set

Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting. If you want to add
or delete channels, and want to use the ghost reduction
function, use Manual Channel Set (
1
Access Main Menu screen
Press MENU.
2
Access Tuner Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "TUNER SET", then
press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to
"TUNER SET", then press OK or #.
3
Perform Auto Channel Set
You can automatically
set the receivable
channels in your area in
the order of their
frequencies.
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "AUTO CHANNEL
SET", then press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to
"AUTO CHANNEL
SET", then press OK or
#.
NOTES:
When Auto Channel Set is complete, "SCAN
COMPLETED" appears on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
4
Return to normal screen
Press MENU.
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
13
EN
pg. 14).
MAIN MENU
FUNCTION SET
= TUNER SET
INITIAL SET
REC LEVEL CTL
VIDEO NAVIGATION
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
= AUTO CHANNEL SET
MANUAL CHANNEL SET
GHOST REDUCTION (GR) ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END