Routing - D-Link DSA-3110 User Manual

DSA-3110 Hotspot Edition – User Manual
On the page displayed, specify the following:
Protocol (HTTP, HTTPS, HTTP+HTTPS, or SSH). For global interfaces (WAN) we
recommend you to use secure HTTPS protocol; a protocol for local interfaces
can be chosen by the employee that is maintaining the device.
Interface A physical interface, through which the web-based interface of the device is
accessed.
IP address A subnet to which the rule is applied.
Mask A mask of the subnet (along with the IP address field, specifies the subnet to
which the rule is applied).
Action The ACCEPT action of a rule means that the access is granted. The DROP action
of a rule means that the access is denied.
When you have specified all the parameters, click the Save button.

Routing

This page is designed to add new static routes to the system (routes for networks that are not
connected directly to the device but are available through the interfaces of the device).
To modify the settings of static routing:
Open the Net > Routing page.
•
Follow the Add routing link.
•
Enter the settings for the new route:
•
Destination network A destination network to which this route is assigned.
Destination netmask A mask of the destination network.
Gateway An IP address through which the destination network can be accessed.
Metric A metric for the route. The lower the value, the higher is the route
Via Interface Select an interface through which the destination network can be
Click the Save button.
•
priority.
accessed. If you have selected the Automatically value of this drop-
down list, the device itself sets the interface on the basis of data on
connected networks.
Page 22 of 61