19-Inch Rack Mounting; Figure 2-4: Audiocodes 19-Inch Rack Shelf For Mp-11X; Figure 2-5: Mp-11X Rack Mount; Table 2-3: Mp-11X Rack Mount - AudioCodes MediaPack MP-11x Series Installation Manual

Installation Manual
2.1.3.3

19-inch Rack Mounting

The MP-11x can be installed in a standard 19-inch rack by placing it on an AudioCodes' 19-
inch rack-mounting shelf (special customer order) that must be pre-installed in a rack. The
shelf can hold up to two MP-11x devices. The rack-mounting shelf can be ordered
separately from AudioCodes. The 19-inch rack installation package contains a single shelf
(shown in the figure below), and eight shelf-to-device screws.

Figure 2-4: AudioCodes 19-inch Rack Shelf for MP-11x

Note:
To install the MP-11x in a 19-inch rack, take these 3 steps:
1. Attach one or two MP-11x devices to the shelf using the shelf-to-device screws
(supplied).
2. Position the shelf in the rack and align its side holes with the rack frame holes.
3. Attach the shelf to the rack using four standard rack screws (not supplied).
Item #
1 Standard rack holes used to attach the shelf to the rack.
2 Eight shelf-to-device screws.
Version 5.6
The 19-inch rack shelf is not supplied in the standard package kit, but can be
ordered separately: Bulk Pack package (MCMK00015) containing 10 rack
mounting shelves for MP-11x. For ordering and pricing, please contact your
AudioCodes' distributor.

Figure 2-5: MP-11x Rack Mount

Table 2-3: MP-11x Rack Mount

Functionality
13
2. Installing the Device
November 2008