Outback Power Systems FLEXnet DC User Manual page 27

ADV/DC/PAGE 2----------------
choose category
PG1 CHARGE AUX PG3
ADV/DC/CHARGE--------------
return amps
DOWN INC DEC
ADV/DC/CHARGE---------------
battery charge
DOWN INC DEC
ADV/DC/CHARGE---------------
parameters met time
minutes
DOWN INC DEC
ADV/DC/CHARGE--------------
charge factor
DOWN INC DEC
ADV/DC/CHARGE--------------
charge parameters
complete
TOP ADV MAIN
ADV--------------------------------
choose device:
FX CC DC MATE
Press the <CHARGE> soft key.
The return amps screen allows the user to set the end of
charge amps using the <INC> and <DEC> soft keys. Press the
TOP
<DOWN> soft key to view the battery voltage screen.
Set the end of charge voltage using the <INC> or <DEC>
soft keys. Next, press the <DOWN> soft key.
TOP
Press the <INC> or <DEC> soft keys to determine the
amount of time the charge parameters must be met before
they considered an accurate state of charge. The default
TOP
period is one minute. By establishing a time, momentary
spikes in voltage are accounted for. Press the <DOWN> soft
key to view the charge factor screen.
Set the charge factor (see page 14) using the <INC> and
%
<DEC> soft keys. When finished, press the <DOWN> soft key.
TOP
Press the <ADV> soft key.
Press the <DC> soft key.
2