Outback Power Systems FLEXnet DC User Manual page 24

STATUS/DC/BATT
days since
parameters met
DOWN UP
STATUS/DC/BATT
battery min today
DOWN UP
STATUS/DC/BATT
battery max today
12.7 vdc
DOWN UP
STATUS/DC/BATT
temp comp'd batt
setpoint 14.2 vdc
DOWN UP
STATUS/DC/BATT
system battery
temperature
DOWN UP
STATUS/DC/BATT
cycle charge
factor 78%
DOWN UP
STATUS/DC/BATT
cycle KwHr charge
efficiency
DOWN UP

charge
batter last met its charge parameters. Press the <RESET> soft
5.9
key to restart the timer. Press the <DOWN> soft key to view
TOP
the next battery status screen.
batttery minimum displays the minimum battery voltage
since it was last reset by the user. Pressing the <RESET>
12.4 vdc
soft key resets the battery minimum voltage; it also resets
RESET TOP
automatically at midnight. Press the <DOWN> soft key to
view the next battery status screen.
batttery maximum displays the maximum battery voltage
since it was last reset by the user. Pressing the <RESET>
soft key resets the battery maximum voltage; it also resets
RESET TOP
automatically at midnight. Press the <DOWN> soft key to
view the next battery status screen.
temp comp' d batt setpoint shows the temperature compen-
sated end of charge volts when a network RTS is part of the
TOP
system. Press the <DOWN> soft key to continue.
When an RTS is present and the temperature is less than 60 C
and greater than10 C, the temperature is displayed in Celsius
29 C
(C). Instead of a temperature reading, ### will appear if an RTS
TOP
is not present, is damaged, or the temperature is less than
10 C or greater than 60 C. Press the <DOWN>soft key.
cycle charge factor displays the last cycle amp hours removed
and amp hours returned (as a percentage). Press the
TOP
<DOWN> soft key to continue.
cycle KwHr charge efficiency states the last cycle kilowatt hours
removed and kilowatt hours returned (as a percentage). Press
65%
TOP
the <DOWN> soft key to view the next screen.
STATUS/DC/BATT provides the number of days since the