Outback Power Systems FLEXnet DC User Manual page 20

FX Total 12.6V
Inverting
AC Loads
Buying $
DC BAT
Bat -0.6A
Net -4AH
Days Since Full
MAIN------------------------------
SUM STATUS SETUP ADV
STATUS
choose device:
FX CC
STATUS/DC/PAGE1 --------------
STATS
METER SHUNT
18
From the MAIN MATE menu, press the <SUM> soft key to
99%
view a summary of the system's operation. This information is
0.000kW
0.000kW
a sum of all FlexNet DC data. Press the second soft key to view
0.000kW
the next SUM screen
12.5V 99%
The fourth SUM screen shows:
0.000kW
00.7kWH
4.8
• Battery voltage
• The current state-of-charge
• Battery readings show the instantaneous amp, amp hour,
•The number of days since the battery last met the charge
Press the first soft key to return to the Main screen.
Press the <STATUS> soft key to open the STATUS screen to
11:30:55A
view the status of either the FX, Charge Controller, of FLEXnet
DC
Press the <DC> soft key to view the status of the FlexNet DC
DC MAIN
Press the <METER> soft key to view the FlexNet DC meter
readings.
BATT TOP
kilowatt, and kilowatt hour figures. When comparing the
amp hours reading to "FULL, " the figure is charge factor
compensated.
parameters.