Advertisement
d.
Print. Press the "MODE" key until "Prt" is displayed. Press the
"TARE" key to confirm. Press the "MODE" key to change
between "hAnd", "Auto" and "Contin". Press the "TARE" key to
accept.
i. "hAnd" – Print on demand
ii. "AUto" – Print when the balance is stable
iii. "Contin" – Print continuously
RS 232 port parameter
ASCII code transmission data format: Every 10BIT as a
Data frame.
1 start bit, 8 data bits, 1 stop bit, no parity
Baud rate: 9600 bps
Protect the unit against moisture.
Please disconnect the unit from the main power supply before cleaning. Do not
use any liquids or aerosol sprays to clean this unit. Use only a clean dampened
cloth.
Intelligent Weighing Technology, Inc.
www.intelligentwt.com
Intell-Lab™ Toploading Balance
PG Series
User Manual
© 2010 Intelligent Weighing Technology, Inc. All rights reserved worldwide.
The information contained herein is the property of Intelligent Weighing Technology, Inc. and is supplied without liability for errors or
omissions. No part may be reproduced or used except as authorized by contract or other written permission. The copyright and the
foregoing restriction on reproduction and use extend to all media in which the information may be embodies.
A Higher Level of Precision...
A Higher Level of Performance
Advertisement
Need help?
Do you have a question about the PG Series and is the answer not in the manual?
Questions and answers