S-Video Connection - JVC HR-S4600U Instructions Manual

AC Power
Cord
Back of VCR
AC Outlet
S-Video Cable
(supplied)
S VIDEO IN
NOTES:
To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
To operate the VCR with your TV using the S-VIDEO connec-
tion, set your TV to the AV mode using the TV's remote
control.
You can also use the TV/VCR button on the VCR's remote
control to set your TV to the AV mode. (
Antenna or Cable
AUDIO OUT
CABLE
BOX
S VIDEO
IN OUT
S VIDEO OUT
VIDEO OUT
75 ohm terminal
TV
pg. 54)
Coaxial Cable
Flat Feeder
Matching Transformer
(not supplied)
IN OUT
R
AUDIO
REMOTE AV
COMPULINK
PAUSE
L
(MONO)
CH3
VIDEO
CH4
Audio/Video Cable
(supplied)

S-VIDEO Connection

CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connections" (
b– Connect the S-Video cable between the S-VIDEO OUT
jack on the rear of the VCR and the S-VIDEO IN jack on
the TV.
ANTENNA IN
(Antenna or Cable input)
ANTENNA IN
VHF/UHF
TV OUT
TV OUT
RF Cable (supplied)
7
EN
pg. 6).