Select The Soundtrack; Video Stabilizer - JVC HR-S4600U Instructions Manual

Select The Soundtrack

Your VCR can record two soundtracks simultaneously (Normal
and Hi-Fi) and play back the selected one, or both together. Or,
when viewing a pre-recorded tape that contains two separate
Hi-Fi audio programs, you can choose to listen to either one by
selecting either "Hi-Fi L" or "Hi-Fi R" in step 3.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5 ∞ or SHUTTLE PLUS % fi , then press OK
or SHUTTLE PLUS
SELECT AUDIO MONITOR
SET MODE
3
Move the highlight bar
(arrow) to "AUDIO
MONITOR" by pressing
CH 5 ∞ or SHUTTLE PLUS
% fi , then press OK or
#
SHUTTLE PLUS
the desired mode:
a– Hi-Fi
b– Hi-Fi L
c– Hi-Fi R
d– Normal
e– Mix
"FRONT AUX INPUT"
appears only with
HR-S4600U.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If the tape being played back has no Hi-Fi soundtrack, the
Normal soundtrack will be heard no matter what choice you
make in step 3.
If RF connection is used for TV, even if Hi-Fi audio monitor is
selected the sound will be mono and will be reproduced in
both loudspeakers.
#
.
FUNCTION
= VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER

VIDEO STABILIZER

to select
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
2ND AUDIO RECORD
= AUDIO MONITOR
S-VHS MODE
AV COMPU-LINK
FRONT AUX INPUT
REAR AUX INPUT
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Video Stabilizer
By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable EP
recordings that were made on another VCR. When this function
is set to "ON", vertical vibration will be automatically corrected.
*The default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH 5 ∞ or
SHUTTLE PLUS % fi, then
press OK or SHUTTLE
PLUS
ON
AUTO
ACTIVATE VIDEO STABILIZER
OFF
ON
OFF
3
Move the highlight bar
OFF
(arrow) to "VIDEO
STABILIZER" by pressing
CH 5 ∞ or SHUTTLE PLUS
% fi, then press OK or
SHUTTLE PLUS
"ON" .
OFF
HI-FI
ON
ON
VIDEO RETURN TO NORMAL
VIDEO
SCREEN
4
Press MENU.
NOTES:
When you finish viewing the tape, be sure to set it back to
"OFF".
Regardless of the setting, this function has no effect during
recording and during special-effects playback.
The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
To watch recordings with close-caption, it is necessary to set
the Video Stabilizer function to "OFF".
= FUNCTION SET
TUNER SET
INITIAL SET
#
.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
#
= VIDEO STABILIZER
to set to
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
27
EN
MAIN MENU
FUNCTION
ON
AUTO
OFF
ON
OFF
ON