JVC HR-S4600U Instructions Manual page 49

SELECT AUX INPUT SET MODE
6
a– FRONT S-VIDEO IN (HR-S4600U only) : Move the
highlight bar (arrow) to "FRONT AUX INPUT" by
pressing CH 5∞ or SHUTTLE PLUS %fi, then press
OK or SHUTTLE PLUS # to set to "S-VIDEO".
b– FRONT VIDEO IN (HR-S4600U only) : Move the
highlight bar (arrow) to "FRONT AUX INPUT" by
pressing CH 5∞ or SHUTTLE PLUS %fi, then press
OK or SHUTTLE PLUS # to set to "VIDEO".
c– REAR S-VIDEO IN: Move the highlight bar (arrow) to
"REAR AUX INPUT" by pressing CH 5∞ or
SHUTTLE PLUS %fi, then press OK or SHUTTLE
PLUS # to set to "S-VIDEO".
d– REAR VIDEO IN: Move
the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing CH
5∞ or SHUTTLE PLUS
%fi, then press OK or
SHUTTLE PLUS # to set
to "VIDEO".
PREVIOUS PAGE
2ND AUDIO RECORD
AUDIO MONITOR
S-VHS MODE
AV COMPU-LINK
= FRONT AUX INPUT S-VIDEO
REAR AUX INPUT
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
"FRONT AUX INPUT" appears only with HR-S4600U.
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
7
Follow the "Picture Control" section on page 26, then
select "EDIT."
If you are using a JVC Master Edit Control-equipped
camcorder — go to step 8.
If you are not using a JVC Master Edit Control-
equipped camcorder — go to step 9.
NOTE:
When you select "EDIT" to dub tapes, be sure to select
"AUTO" or ("NORM" when "VIDEO CALIBRATION" is
set to "OFF") after you finish dubbing the tapes.
FUNCTION
= VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
2ND AUDIO RECORD
OFF
HI-FI AUDIO MONITOR
S-VHS MODE
ON
ON AV COMPU-LINK
FRONT AUX INPUT
= REAR AUX INPUT
VIDEO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
ENABLE REMOTE PAUSE
FUNCTION
8
Press CH 5 ∞ or SHUTTLE
PLUS % fi to move the
highlight bar (arrow) to
"AV COMPU-LINK", then
press OK or SHUTTLE
PLUS
The REMOTE PAUSE/AV
COMPU-LINK connector
works as the AV
Compulink Playback
connector when "AV
COMPU-LINK" is set to
ON
AUTO
"ON" (
OFF
works as the Remote
ON
Pause connector when
OFF
OFF
"AV COMPU-LINK" is set
to "OFF".
"FRONT AUX INPUT"
appears only with
HR-S4600U.
RETURN TO NORMAL SCREEN
OFF
9
Press MENU.
HI-FI
ON
ON
VIDEO
S-VIDEO
START PLAYER
10
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
11
Set your VCR to its record mode.
If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
NOTES:
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT mode
("VIDEO" or "S-VIDEO") is selected after you have finished
editing (
= VIDEO CALIBRATION
#
to set to "OFF".
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
pg. 31), and
= AV COMPU-LINK
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
steps 4 – 6 on pg. 48 and 49).
49
EN
FUNCTION
ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER
OFF
VIDEO STABILIZER OFF
NEXT PAGE
PREVIOUS PAGE
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
S-VHS MODE ON
OFF
FRONT AUX INPUT VIDEO
REAR AUX INPUT VIDEO