Semi-Auto; Auto Daylight Saving Time - JVC HR-S4600U Instructions Manual

12
EN
OK
1
4
7
1
MENU
2 3
2
5 6
8 9
0
4
OK
SHUTTLE PLUS
INITIAL SETTINGS (cont.)

Semi-Auto

You can change the Host Channel/D.S.T. /Time Zone setting
manually.
SET AUTO CLOCK TO ON
5
At the Clock Set screen,
press OK or SHUTTLE
JOG #
PLUS
SHATTLE
move the highlight bar to
"AUTO CLOCK" and press
CH 5 ∞ or SHUTTLE PLUS
% fi to set to "ON".
a– To select the Host
Channel — go to step 6
b– To select the D.S.T. mode — go to step 7
c– To select the Time Zone — go to step 8
NOTE:
The time that has been set previously will be erased
when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
ZONE" setting is changed.
SELECT HOST CHANNEL
6
You can either select "AUTO" or enter a PBS channel
number. Move the highlight bar to "HOST CH" by
pressing OK or SHUTTLE PLUS
or SHUTTLE PLUS % fi to set to "AUTO" or the desired
PBS channel number.
NOTE:
There are some PBS channels that do not transmit clock
setting data.
SELECT D.S.T. MODE
7
You have three choices:
a– Select "AUTO" and the adjustment to your VCR's
clock will be made according to the incoming signal
from the host channel.
b– Select "ON" and the adjustment will be made based
on the clock itself.
c– Select "OFF" if Daylight Saving Time does not apply
to you.
Move the highlight bar to "D.S.T." by pressing OK or
SHUTTLE PLUS
PLUS % fi to select the desired mode.

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
TIME
repeatedly to
1:00PM
AUTO CLOCK : ON
HOST CH
D.S.T.
TIME ZONE : AUTO
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
#
, then press CH 5 ∞
#
, then press CH 5 ∞ or SHUTTLE
CLOCK SET
DATE YEAR
12/24 99 FRI
: AUTO (CATV)
: AUTO