Semi-Auto (In The U.s.a. Only) - JVC HR-J3005UM User Manual

10
EN
MENU
OK
Downloaded from: https://www.usersmanualguide.com/
1
1 2 3
2
4 5 6
7 8 9
0
4
•• ••
PUSH JOG
3
Semi-Auto (In the U.S.A.
only)
You can change the Host Channel/D.S.T. /Time Zone setting
manually.
SET AUTO CLOCK TO ON
5
At the Clock Set screen,
press OK or PUSH JOG
to move the highlight bar
to "AUTO CLOCK" and
press CH 5 ∞ or PUSH
JOG% fi to set to "ON".
a– To select the Host
b– To select the D.S.T.
c– To select the Time Zone — go to step 8
NOTE:
The time that has been set previously will be erased
when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
ZONE" setting is changed.
SELECT HOST CHANNEL
6
You can either select "AUTO" or enter a PBS channel
number. Move the highlight bar to "HOST CH" by
pressing OK or PUSH JOG
PUSH JOG% fi to set to "AUTO" or the desired PBS
channel number.
CH
NOTE:
There are some PBS channels that do not transmit clock
setting data.
SELECT D.S.T. MODE
7
You have three choices:
a– Select "AUTO" and the adjustment to your VCR's
b– Select "ON" and the adjustment will be made based
c– Select "OFF" if Daylight Saving Time does not apply
Move the highlight bar to "D.S.T." by pressing OK or
PUSH JOG
select the desired mode.
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
INITIAL SETTINGS (cont.)
Channel — go to step 6
mode — go to step 7
, then press CH 5 ∞ or
clock will be made according to the incoming signal
from the host channel.
on the clock itself.
to you.
, then press CH 5 ∞ or PUSH JOG% fi to
CLOCK SET
TIME DATE YEAR
1:00PM 12/24 98 THU
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END