Advertisement
Quick Links
CHARGE A CALL TELEPHONE
WITH INSERTION CARD READER
Equipped with CST 2.01 firmware.
Communication Equipment
& Engineering Company
SERVICE MANUAL
FOR
MODEL SSC-303-I
OR
MODEL BLC-303-1
(FORMERLY 306-I)
SSC OR BLC-303-1 (306-I)-CST2.01-ISSUE 4.0
Serving the Telephone Industry Since 1930
519 W South Park Street
Okeechobee, FL 34972
Voice: 863-357-0798
Fax: 863-357-0006
Advertisement
Troubleshooting
Related Manuals for CEECO Charge-A-Call BLC-303-1
Summary of Contents for CEECO Charge-A-Call BLC-303-1
- Page 1 SSC OR BLC-303-1 (306-I)-CST2.01-ISSUE 4.0 SERVICE MANUAL MODEL SSC-303-I MODEL BLC-303-1 (FORMERLY 306-I) CHARGE A CALL TELEPHONE WITH INSERTION CARD READER Equipped with CST 2.01 firmware. Serving the Telephone Industry Since 1930 Communication Equipment 519 W South Park Street & Engineering Company...
-
Page 2: Important Information
Issue 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSC OR BLC-303-I EQUIPPED WITH CST2.01 FIRMWARE (FORMERLY 306-I) SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support. -
Page 3: Table Of Contents
10.0 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS..........16 11.0 TROUBLESHOOTING ........................ 17 TROUBLESHOOTING CONTINUED ..................18 12.0 FCC NOTICE..........................19 13.0 REPAIR AND RETURN INFORMATION ................20 14.0 WARRANTY POLICY ........................ 21 15.0 LOCATION OF PROGRAMMING JUMPERS ..............22 CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 4: Introduction
INTRODUCTION The practices in this manual provide installation and maintenance information for the CEECO Model SSC OR BLC-303-I Charge-A-Call Telephone with Insertion Card Reader (formerly 306-I) and firmware CST2.01. The information in this manual is subject to change without notification. -
Page 5: Programming
EXAMPLE: #75 950-**** will not allow digits to be dialed after reaching the OCC. 950-****-**** will allow unlimited dialing after the OCC call has been completed. To disable all phone implemented call restrictions enter eleven "*"s in one of the free call index locations. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 6: Programming Continued
The protocols available at this time are: NUMBER ENTERED PROTOCOL TYPE Dump card data and phone ID. (testing) AT&T to TSPS SPRINT Dump full card data. (testing) 3 error tones and reset phone. BOC cards to TSPS. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 7: Programming Continued
51, is shorter then the numbers that follow it the right protocol is selected because the beginning digits are different. Be sure that you adjust the other tables if you have already entered data in them. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 8: Programming Continued
3.11 When programming is completed, place the two mini-jumpers in the "OFF" position, replace and secure the backplate, and place the phone on hook. PROGRAMMING CONTINUED CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 9: Programming Tables
Clear All Programmable Memory PROGRAMMING TABLES OPTION TABLE CODE DESCRIPTION _ _ _ _ _ _ _ _ _ Digit 1 2 3 4 5 6 7 8 9 PROGRAMMING TABLES CONTINUED IDENTIFICATION TABLE CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 10: Programming Tables Continued
_____________ ______________ #25 _ _________ _____________ ______________ #26 _ _________ _____________ ______________ #27 _ _________ _____________ ______________ #28 _ _________ _____________ ______________ #29 _ _________ _____________ ______________ PROGRAMMING TABLES CONTINUED SPEED DIAL TABLE CEECO Communication Equipment and Engineering Company PROPRIETARY... - Page 11 _ - _ _ _ - _ _ _ - _ _ _ _ _ - _ _ _ - _ _ _ - _ _ _ _ _ - _ _ _ - _ _ _ - _ _ _ _ CEECO Communication Equipment and Engineering Company PROPRIETARY...
-
Page 12: Programming Tables Continued
EXAMPLES OF CALL RESTRICTIONS/ALLOWED CALLS (950-***-****-* allows access to 950 exchange numbers) (1-800-***-****) 1-***-555-1212 interlata directory assistance) (1-555-1212 intralata directory assistance) (*11 allows 411, 911, 011, etc.) (0-***-*-**-**** allows all 0-,0+,and calling cards) CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 13: Operation
FREE CALLS. If the user attempts to dial a call not programmed in the free call index (call restrictions enabled), the phone will give three warning tones to the user, go on hook, and reset for another call attempt. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 14: Specifications
ABA Track-2, 1S02 Capacity 40 characters Speed 8-150 cm/sec Life 500,000 reads min. POP PROTOCOLS SUPPORTED Southlake Technologies Summa-Four AT&T "Calling Card System" (CCS) TSPS SPRINT BOC Cards to TSPS Custom Programming on Special order CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 15: Parts List
CTA Board 917-006 OPTIONAL: Security Tool 301-037 GTE Logo 301-041 RECOMMENDED TOOLS AND TEST EQUIPMENT Volt/Ohm Meter 3/8∀ Nut Driver Security Tool, CEECO Part Number 301-037 Flat Blade Screw Driver DTMF Test Set CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 16: Installation Notes And Assembly Instructions
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 17: Troubleshooting
PROBLEM: PHONE DOES NOT READ CARD POSSIBLE CAUSE: CARD DIRTY READ HEAD CARD READER CARD READER CABLE MCRK-2 CARD PROBLEM: TRANSMITTER DOES NOT TURN ON POSSIBLE CAUSE: HANDSET MCRK-2 CARD NETWORK CABLE ASSY NETWORK CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 18: Troubleshooting Continued
PROBLEM: LOOSES MEMORY CONTENTS AFTER EXTENDED PERIODS OF NO USE POSSIBLE CAUSE: LITHIUM BATTERY PROBLEM: PHONE CANNOT BE PROGRAMMED POSSIBLE CAUSE: MINI-JUMPERS MISPLACED MEMORY CHIP MCRK-2 CARD KEYPAD KEYPAD CABLE ASSY. PROBLEM: RINGER DOES NOT OPERATE POSSIBLE CAUSE: RINGER NETWORK CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 19: Fcc Notice
The "line" to which you will connect the telephone (that is, your phone number), the telephone's FCC registration number and ringer equivalence number. These numbers are listed in section 7.0 The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 20: Repair And Return Information
13.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs for both directions. 13.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturers list price. -
Page 21: Warranty Policy
Printed circuit boards should not be field repaired. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty. -
Page 22: Location Of Programming Jumpers
ON position BEFORE going off-hook. When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position, this will decrease battery life. CEECO Communication Equipment and Engineering Company PROPRIETARY...
Need help?
Do you have a question about the Charge-A-Call BLC-303-1 and is the answer not in the manual?
Questions and answers