Husqvarna DM650 Operator's Manual page 10

Use and care
CAUTION! This machine is ideal for
!
drilling holes in concrete, bricks and
various stone materials. The machine is
intended for stand mounted drilling.
• The machine is intended for use in industrial
applications by experienced operators.
• Make sure that the stand is secured correctly.
• Make sure that the drilling machine is secured
correctly in the stand.
• Inspection and/or maintenance should be carried out
with the motor switched off and the connector
disconnected from the power source.
• The machine has a very high torque. This demands
good concentration during work, as serious personal
injuries can occur if the drill bit suddenly jams.
• Keep all parts in good working order and ensure that
all fixtures are properly tightened.
• Always switch off the machine before you move it.
10 – English
OPERATING