ZyXEL Communications P8701T User Manual page 90

Chapter 4 WAN
Table 21 WAN Configuration: IPoE
LABEL
Option 125
Use the following
Static IP address
WAN IP Address
WAN Subnet
Mask
WAN gateway IP
Address
Obtain an IPv6
address
automatically
Dhcpv6 Address
Assignment
Use the following
Static IPv6 address
WAN IPv6
Address/Prefix
Length
WAN IPv6
Subnet Prefix
Length
WAN Next-Hop
IPv6 Address
Back
Next
IPoA
This screen displays only when you set the DSL link type to IPoA for the ATM interface and
configure a WAN connection using the ATM interface.
Figure 26 WAN Configuration: IPoA
The following table describes the labels in this screen.
Table 22 WAN Configuration: IPoA
LABEL
WAN IP Address
WAN Subnet Mask
90
DESCRIPTION
Enable this to add vendor specific information to DHCP requests that the VDSL Router
sends to a DHCP server when getting a WAN IP address.
Select this if you have a static IP address.
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Enter the gateway IP address provided by your ISP.
Select this option to have the VDSL Router use the IPv6 prefix from the connected
router's Router Advertisement (RA) to generate an IPv6 address.
Select this check box to obtain an IPv6 address from a DHCPv6 server.
The IP address assigned by a DHCPv6 server has priority over the IP address
automatically generated by the VDSL Router using the IPv6 prefix from an RA.
Select this option if you have a fixed IPv6 address assigned by your ISP.
Enter the static IPv6 address and bit number of the IPv6 subnet mask provided by your
ISP.
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Enter the gateway IPv6 address provided by your ISP.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Basic Home Station VDSL2 P8701T User's Guide