Table of Contents
Advertisement
Chapter 5 LAN Setup
Table 28 LAN Setup (continued)
LABEL
Enable IGMP Snooping
Disable DHCP Server
Enable DHCP Server
Start IP Address
End IP Address
DHCP Server Lease
Time
Static IP Lease List
MAC Address
IP Address
Remove
Add Entries
Obtain DNS info from
WAN
Use Static DNS IP
address
First DNS Server,
Second DNS Server
Configure the second IP
Address and Subnet
Mask for LAN interface
IP Address
Subnet Mask
Apply/Save
5.2.1 Add DHCP Static IP Lease Screen
Click Add Entries in the LAN Setup screen to display the following screen.
106
DESCRIPTION
Enable IGMP snooping to have the VDSL Router passively learn memberships in
multicast groups.
Select Standard Mode to have the VDSL Router forward multicast packets to a port
that joins the multicast group and broadcast unknown multicast packets from the
WAN to all LAN ports.
Select Blocking Mode to have the VDSL Router block all unknown multicast
packets from the WAN.
Select this to have the VDSL Router not provide DHCP services. Users must
configure LAN devices with manual network settings if you do not have another
DHCP server on the network.
Select this to have the VDSL Router serve as the DHCP server for the network to
assign IP addresses and provide subnet mask, gateway, and DNS server information
to LAN devices.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the last of the contiguous addresses in the IP address pool.
Specify for how many hours to assign an IP address to a LAN device before making
it available for reassignment to other systems.
Use this table to assign IP addresses on the LAN to specific computers based on
their MAC Addresses.
The MAC (Media Access Control) of a LAN device to which the entry's IP address is
assigned.
This field displays the IP address reserved for the LAN device with the entry's MAC.
Select entries and click the Remove Entries button to delete them.
Click this button to create a new static IP lease entry.
Select this to have the VDSL Router get the Domain Name System (DNS) server
addresses from the VDSL Router's WAN interface.
Select this to have the VDSL Router use the DNS server addresses you configure
manually.
Enter the first and second DNS (Domain Name System) server IP address the VDSL
Router passes to the DHCP clients.
Select the check box to use IP alias to configure another LAN network for the VDSL
Router.
IP alias partitions a physical network into different logical networks over the same
Ethernet interface. The VDSL Router supports multiple logical LAN interfaces via its
physical Ethernet interface with the VDSL Router itself as the gateway for the LAN
network. You can also configure firewall rules to control access to the LAN's logical
network (subnet).
Enter the second LAN IP address of your VDSL Router in dotted decimal notation.
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default).
Click this button to save your changes.
Basic Home Station VDSL2 P8701T User's Guide
Advertisement
Table of Contents
