Table of Contents
Advertisement
Chapter 8 Quality of Service (QoS)
Figure 46 QoS Queue Setup
The following table describes the labels in this screen.
Table 40 QoS Queue Setup
LABEL
Name
Key
Status
Interface
Qid
Prec/Alg/Wght
DSL Latency
PTM Priority
Shaping Rate
Burst Size
Enable
Remove
Add
128
DESCRIPTION
This shows the descriptive name of this queue.
This is the queue's index number.
This field displays whether the queue is active or not. A yellow bulb signifies that this queue
is active. A gray bulb signifies that this queue is not active.
This shows the name of the VDSL Router's interface through which traffic in this queue
passes.
This shows the priority of this queue for the interface.
This displays the queue's default precedence, queue management algorithm, and weighted
round robin weight.
This displays whether the ATM interface uses interleave delay (Path1) or fast mode with no
interleave delay (Path0).
This displays the queue's PTM priority (High or Low). This has no effect at the time of
writing.
This displays the maximum transmission rate for traffic in this queue.
This displays the maximum number of cells the queue can send at the shaping rate.
Select an entry's Enable option and click the Enable button to turn it on.
Select an entry's Remove option and click the Remove button to delete it.
Click this button to create a new queue entry.
Basic Home Station VDSL2 P8701T User's Guide
Advertisement
Table of Contents
