Dns Server - ZyXEL Communications P8701T User Manual

Chapter 4 WAN
Figure 28 WAN Configuration: Default Gateway: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 24 WAN Configuration: Default Gateway: PPPoE or IPoE
LABEL
Selected Default
Gateway Interfaces
Available Routed
WAN Interfaces
Selected WAN
Interface
Back
Next

4.4.1.6 DNS Server

The screen is not available when you select Bridging in the WAN Service Configuration screen.
Note: If you configure only one IPoA or IPoE connection using the ATM interface on the
VDSL Router, you must enter the static DNS server address.
92
DESCRIPTION
Select a WAN interface through which you want to forward the traffic.
You can select multiple WAN interfaces for the device to try. The VDSL Router tries the
WAN interfaces in the order listed and uses only the default gateway of the first WAN
interface that connects; there is no backup WAN function. To change the priority order
remove them all and add them back in again.
These are the WAN interfaces you can select from.
Select a WAN interface through which to forward IPv6 traffic.
Click this button to return to the previous screen.
Click this button to continue.
Basic Home Station VDSL2 P8701T User's Guide