Haze 400™ Introduction Introduction: Introduction...................3 Customer Support................3 The Haze 400 is a professional hazer. It is capable of producing Warnings...................5 very large quantities of haze quickly and quietly. In addition, with Features..................6 DMX on board operators are able to control the unit completely Getting Started................7...
Never block the ventilation holes. • Do not attempt to operate this unit, if it becomes damaged in any way. Every Haze 400™ has been thoroughly tested and has been shipped in • Never operate this unit when it’s cover is removed.
XLR connector of the last unit in your daisy chain to terminate the line. value 0 to 5 no haze output, channel value 6 to 249 the Haze 400 will Using a cable terminator will decrease the possibilities of erratic behav- produces haze.
Linking: Stand Alone Operation (Without the remote and a DMX The Haze 400™ is a DMX intelligent hazer and must follow standard Controller) DMX protocol when used in DMX mode. A DMX signal cannot be split Plug power cord into a grounded electrical outlet. To operate without unless you are using an approved DMX splitter such as the American remote control, simply turn hazer on.
Return 1. This function allows you to set the time the haze will burst when the machine to your Elation dealer. Always drain tank before in the timer mode. mailing or transporting this unit.
® tive parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Elation Lighting ® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Lighting .