Message Waiting - Panasonic NCP500 Operating Manual

1.3.42 Message Waiting

1.3.42 Message Waiting
For an extension leaving a message waiting indication
When the called extension is busy or does not answer your call, you can
leave a notification so that the called party may call you back.
For an extension receiving a message waiting indication
As a message receiver, the Message button light or Message/Ringer
Lamp lets you know that a call has been received. If you receive
notification, you can call back the caller by a simple operation.
Note
For an extension receiving a message waiting indication, this feature
is not available for SIP extensions (except the KX-HGT100). For
KX-HGT100 users, refer to the Quick Reference Guide of the
KX-HGT100 for instructions.
For an extension leaving a message waiting indication
To leave a message waiting indication
PT/SLT/PS
When the called extension is busy or does not answer
MESSAGE
OR
4
Press MESSAGE
or enter 4.
To leave/cancel a message waiting indication
PT/SLT/PS/SIP Extn. PT and SLT
Off-hook.
For an extension receiving a message waiting indication
98 Operating Manual
C.Tone
On-hook.
1
7 0
OR
0
Enter 70. Enter 1 to leave
or 0 to cancel.
Leave
desired
extension no.
Cancel
Enter desired
extension number.
C.Tone
On-hook.
Document Version 2009-11