Private Network Features-Clip (Calling Line Identification Presentation) - Panasonic NCP500 Operating Manual

To let a third party join your conversation and establish a three-party conversation
PT/PS
Your extension (on the outside call)
(S-CO)
Press green
S-CO.
Other extension
•
Only an S-CO button can be used for this operation.
•
You can leave a three-party conversation and let the two other parties talk by simply going
on-hook.
1.3.52 Private Network Features—CLIP (Calling Line Identification
Presentation)
When making a call through a private network, you can present your preprogrammed telephone number to the
called party.
You can select the telephone number sent, either the number of the line used or the number assigned to your
extension.
If you select "Public", the calling/called party sees the number of the line used (subscriber's number).
If you select "Your extension", they see the telephone number assigned on your extension.
To show either the number assigned to the CO line or your extension
PT/SLT/PS/SIP Extn.
Off-hook.
•
If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD group will be used.
Document Version 2009-11
1.3.52 Private Network Features—CLIP (Calling Line Identification Presentation)
Wait for an answer.
To prolong, press
the S-CO again.
The S-CO button will flash
at all extensions that have
that S-CO button.
(S-CO)
Press the flashing
S-CO within 5 seconds.
7 2
Enter 7 2.
C.Tone
A three-party conversation
is now established.
C.Tone
Off-hook.
1
Public
OR
C.Tone
Your extension
2
Enter 1 for public or 2
for your extension.
Talk.
Talk.
On-hook.
Operating Manual 109