Accessories; Basic Requirements For Positioning Built-In Fi Res - Bellfires SLIDE BELL 55 - 55 Installation Instructions And Instructions For Use

www.tapis.pl
Bellfi res
2.3.
The following accessories can be supplied by your dealer:
2.4.
General
The appliance may only be set up in a room in which the location, architectural
construction and activity is not endangered by the presence of a fi re. The
surface on which the appliance is to be placed must be correctly shaped and big
enough to accommodate the appliance safely (in compliance with DIN 18895,
part 1).
When fi tting, all local and/or national safety regulations must be followed closely,
particularly in rooms with walls/fl oors containing fl ammable material. If in doubt,
consult the fi re prevention department of your local fi re brigade and/or the
architectural department of your local authority.
Instructions for use and installation instructions

ACCESSORIES

Part no Accessorie
323105 Fan set Slide Bell:
Set, consisting of 2 convection fans (230 VAC /
90 W each) including fan speed controller and
assembly material.
312829 Convection set General:
(for convection air extraction)
Advice: use if appliance is installed with fan-set.
302188 • 1x Flexible aluminium pipe Ø125 mm, L= 3 m (max.)
310178 • 2x Fitting box 135 x 135 mm
309872 • 2x Convection exit grid, white, 145 x 145 mm
309730 • 2x Collar adaptor Ø125 mm
304040 • 4x Hose clamp Ø125 mm
BASIC REQUIREMENTS FOR POSITIONING BUILT-IN FIRES
English
13