Before Printing - Canon PIXMA mini260 Photo Printing Manual

Before Printing
This section describes the components of the printer.
Printer Parts and Their Functions
USB Port
Connects the
printer to a com-
puter through a
USB interface.
IrDA Port
Receives the image data
sent from a mobile phone or
a PDA via infrared commu-
nication.
~ ~--Direct
Print Port
7
Connects the printer
V ~
to a PictBridge com-
patible digital camera,
digital video camcord-
er or the optional
Bluetooth unit*.
Auto Sheet Feeder
Load paper here.
Lock Switch - - - - - - ' Card Slot
Slide to the right to open the
Access Lamp
Set the memory card from a
Printer Cover. This lamp will turn on when the mem- digital camera here. For in-
cry card is inserted into the Card Slot. structions, see "Using a Mem-
It will flash while reading or writing ory Card" on page 15.
from the card.
LCD Monitor
----:::~~--~
Displays menus,
setting items, and
photos for printing.
Paper Guide
When loading paper, ensure
that the left edge just touches
this guide.
Printer Cover "
Open to replace the ink
tank or remove jammed
paper.
Paper Feed Tray
~
Open and fold in half before
printing to support paper.
• FrontView
*The Bluetooth unit is not available to some regions due to the law or the regulations of the
countries. For details, contact a Canon service representative.
Before Printing
3