Printer Does Not Start Or Stops During Print Jobs - Canon PIXMA mini260 Photo Printing Manual

Cause Action
Media Type setting in the
Operation Panel does not
match the actual type of paper.
Check that the Media Type set in the Operation Panel matches
the type of the loaded printing paper.
If you notice abrasion even with the media type set correctly to
match the loaded paper, set the Paper Thickness Lever to the
right.
• Colors Are Uneven or Streaked
Cause Action
Print quality is not set
appropriately.
In the Operation Panel, set Print quality to High (quality-
priority).
Especially when printing a document that requires a lot of ink,
increasing the Print Quality setting is effective in reducing
uneven colors.
Printer Does Not Start or Stops During Print Jobs
• Printing Does Not Start
Cause Action
Ink tank is empty.
Ink tank is not installed
securely.
An ink tank is not installed properly, or is out of ink.
Confirm the error message displayed on the LCD and take the
appropriate action to resolve the error.
If the ink lamp is not lit, press the
8
mark on the ink tank until it
clicks into place. The ink lamp lights up red when the ink tank is
fully inserted.
• Printing Stops Before It Is Completed
66 Troubleshooting