Printer Does Not Start Or Stops During Print Jobs - Canon Pixma iP6320D Series Quick Start Manual

Troubleshooting
Printer Does Not Start or Stops During Print Jobs
Problem
I
Possible Cause
I
Try This
Printer Does Not There may be Restart your computer. It may solve the problem.
Start or Printer problems with your
Delete an undesired print job, if there is any. Use
Canon
IJ
Status Monitor
in
Stops During operating system
Windows or
Printer Setup Utility (or Print Center)
in Macintosh for the deletion.
Print Jobs
i;irJmw!g
1. Open the printer properties dialog box.
See
"Opening the Printer Properties Dialog Box Directly from the Start Menu"
on page 16.
2. Click the Maintenance tab and then View Printer Status.
3. Click Display Print Queue.
4.
Select
Cancel All Documents
in the
Printer
menu.
W
Note In Windows XP and Windows
2000
The print jobs may not be selected.
5.
When the confirmation message is displayed, click
Yes.
The print job is deleted.
W
Note In Windows Me and Windows 98
Click to select an undesired document and select
Purge Print
Documents
in the
Printer
menu.
I;,~~
1. Select
Applications
from the
Go
menu.
2. Double-click the Printer Setup Utility icon in the Utilities folder.
When using Mac
as x
v. 10. 2, double-click the
Print Center
icon.
3. Double-click the name of your printer displayed upder
Name
in the
Printer List.
4. Click to select an undesired document and click
~.
The print job is deleted.
Cannot Print to Incorrect page size Ensure that the page size setting matches the size of the paper loaded in the
End of Job
is selected printer:
•
Check the
Page Size
setting from within your application to ensure that it
matches the size of the paper loaded.
•
Check
Page Size
on the
Page Setup
tab in the printer properties dialog box of
the printer driver (Windows) or the
Page Setup
dialog box of the printer driver
(Macintosh) to ensure that it matches the size of the paper loaded.
,Yiyf1nmm
Check the size of the print data. For Windows XP and Windows 2000, if the size of
The size of the print
the data is too large, part of it may be lost. When the spool format is EMF, follow
data is too large
the procedure below.
1. Open the printer properties dialog box.
2. On the Page Setup tab, click Print Options.
3. Select the
Reduce spool data size
check box, and click
OK.
W
Note When
Reduce spool data size
is set, the print quality may be
degraded.
25