Using The Juice Extractor - Cuisinart CJE1000U User Manual

Using the Juice Extractor

1. Make sure that the juice extractor is properly assembled. (See instructions for use page 9).
2. Plug the unit into a 230V mains socket.
3. Check that the flow spout is open. NEVER PRESS FRUIT WHEN THE POUR SPOUT IS CLOSED.
4. Wash the selected fruit or vegetables.
5. Select the desired speed. The ring of blue light will start to flash.
6. Press the ON/OFF button to start the fruit extractor. The ring of blue light will remain lit.
7. Lift the pusher and remove it from the feed tube. Insert the food and push the food using the pusher, pressing
firmly.
8. Adjust the speed of the juice extractor to suit the food being pressed. The harder the food, the higher the
speed used.
9. The juice will flow into the juice pitcher and the pulp will collect in the pulp container.
10. When all the juice has been extracted, press the ON/OFF button and turn the speed control to «0» to turn
off the juice extractor.
Frequently Asked Questions
WHAT DO I DO IF:
The juice extractor doesn't turn on?
The flow is weak?
The lid does not lock?
ANSWERS
The safety mechanism in the handle has not been unlocked.
Set the speed to between 1 and 5.
Press the ON/OFF button.
Make sure the flow spout is fully opened.
Too much pulp in the filter can slow the flow of juice. Turn
the extractor off and clean the filter basket.
Press the button in the handle to unlock then press on the
handle to lock.
13