Error! No text of specified style in document. Error! No text of specified style in document.
Replacement Procedures
4.11
Speakers
Removing the Speakers
Remove the Speakers according to the following procedures and Figure 4.21.
1. Remove the four M2×3 screws securing the two speakers.
2. Remove the left and right speakers from the logic upper assembly.
Installing the Speakers
Install the speakers according to the following procedures.
1. Seat the left and right speakers in the logic lower upper assembly.
2. Secure the four M2×3 screws.
3. Route the speaker cable in the routing channel on the logic lower assembly and secure it
in place with tape.
Satellite P770/P775 Series Maintenance Manual [CONFIDENTIAL]
M2×3*4
Figure 4.21 Removing the speakers
4
4-31