4 Replacement Procedures
4.13 Speakers and Speaker Cushions
Removing the Speakers
Remove the speakers according to the following procedures and Figure 4.26.
1. Pull the FCC cable covering the speaker cables from the slot as indicated in Figure 4.26.
2. Pull the speaker cables from the routing channel.
3. Remove the four M2x3 screws securing the speakers to the logic upper assembly and
remove the speakers.
Satellite A660/A665/A660D Maintenance Manual
M2x3*2
Figure 4.26 Removing the speakers
4.13 Speakers and Speaker Cushions
M2x3*2
4-36