4 Replacement Procedures
specified style in document.
4.12
Touchpad on/off & Light bar
Remove the touchpad on/off & light bar according to the following procedures and Figure 4.22.
Removing the Touchpad on/off & Light bar
1. Disconnect the two touchpad FFCs from the bar.
2. Remove the two M2.5x4 screws securing the bar.
3. Gently remove the bar from the logic upper assembly.
Figure 4.22 Removing the touchpad on/off & light bar
Installing the Touchpad on/off & Light bar
1. Seat the touchpad on/off & light bar in the logic upper assembly.
2. Secure the two M2.5x4 screws.
3. Connect the FFC to the bar.
Error! No text of specified style in document. Error! No text of
M2.5×4*2
[CONFIDENTIAL]
Satellite P770/P775 Series Maintenance Manual