4 Replacement Procedures
specified style in document.
4.19
Motherboard
Removing the Motherboard
Remove the motherboard according to the following procedures and Figure 4.29.
1. Pull out the DC-IN connector from the routing channel.
2. Disconnect the Jpower connector and LVDS cable from the motherboard.
3. Remove the two M2.5x5 screws securing the motherboard.
4. Gently lift the right edge of the motherboard to free the port connectors, and remove the
motherboard from the logic lower assembly.
M2.5×5*2
Figure 4.29 Removing the motherboard from the logic lower assembly
Installing the Motherboard
Install the motherboard according to the following procedures.
1. Align the ports on the left side of the motherboard to the corresponding openings in the
logic lower assembly, and seat the motherboard in the logic lower assembly.
Error! No text of specified style in document. Error! No text of
[CONFIDENTIAL]
Satellite P770/P775 Series Maintenance Manual