Remote Control Explanation - Conceptronic CM3PVRL User Manual

ENGLISH
The remote control is used to control the unit. On the inside cover of this manual you will find a picture of
the remote control. The numbers of the buttons correspond with the table below, to explain each function
of the remote control.
Nr Button
1. POWER ( )
2. INFO
3. SOURCE
4. AUDIO
5. TITLE
6. 0-9
7. +10
8. EPG
9. FAVORITE
10. COPY
11. REPEAT
12. VOLUME
13. VOLUME
14. RETURN
15. , , ,
16. REC
17. PLAY / PAUSE
18. REWIND ( )
19. PREVIOUS ( )
20. OUTPUT
21. SETUP
22. NEXT ( )
23. FAST FORWARD (
24. STOP
25. TIMER
26. ENTER
27. STORAGE
28. CHANNEL
29. CHANNEL
30. MUTE
31. QUALITY
32. CLEAR
33. SELECT
34. EDIT
35. 100
36. ANGLE
37. SUB-T
38. DTV – INFO
39. DTV – T / R
40. MENU
41. LED

5. Remote Control Explanation

Description
Turn the unit on or to standby mode
Display Channel information / File information
Switch between AV & Playback
Change the DVD Audio track
Return to the DVD Title screen
Menu Navigation / Direct channel entry
+ 10 Channels
< No Function >
< No Function >
Display the Copy Menu
Change the Playback Repeat Mode
Volume Up
Volume Down
Return to the previous screen / channel
Navigation Keys: Navigate through the Menu's
Start Recording / Increase Record Time (+30 Minutes)
Start Playback / Pause Playback / Pause Recording /
Initiate Timeshift
Rewind Playback
Previous File / Track / Chapter / Picture
Change the Output signal (Composite, Component, S-Video)
Show the Setup Menu on your screen
Next File / Track / Chapter / Picture
) Fast Forward Playback
Stop Playback / Stop Recording / Disable Timeshift
Enter the Record Scheduler
Confirm selection
Change the Active Storage Device (HDD, USB, Card)
Channel Down
Channel Up
Mute the sound
Set the record quality
Clear the input / Delete the selection
< No Function >
File Edit Menu
+ 100 Channels
Change the DVD Playback angle
Change the DVD Subtitle
< No Function >
< No Function >
Display the Main Menu
Indicates the operation of the remote control
28