Advertisement
Quick Links
Conceptronic CM3PVR Firmware Upgrade Instructions
A. Suitable firmware versions
This firmware upgrade is only suitable for Conceptronic CM3PVR.
Note:
This firmware upgrade is not suitable for the Conceptronic CM3PVRD, CM3PVRL and CM3PVRN.
®
Copyright
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 10
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Conceptronic CM3PVR
Summary of Contents for Conceptronic CM3PVR
- Page 1 Conceptronic CM3PVR Firmware Upgrade Instructions A. Suitable firmware versions This firmware upgrade is only suitable for Conceptronic CM3PVR. Note: This firmware upgrade is not suitable for the Conceptronic CM3PVRD, CM3PVRL and CM3PVRN. ® Copyright 2008 by Conceptronic – All rights reserved www.conceptronic.net...
- Page 2 B. Upgrade information A firmware upgrade can improve the performance of your Conceptronic device and can sometimes add new features. Periodically firmware updates will be available via the official Conceptronic Website. Conceptronic is not liable for any damages caused by an unofficial, not by Conceptronic approved firmware for this specific Conceptronic device.
- Page 3 Disconnect the USB stick or memory card from your computer. 2. Updating the firmware Connect the CM3PVR to your TV and set the power switch on the backside of the CM3PVR to the ‘I’ position. Turn the CM3PVR on (with the remote control).
- Page 4 Disconnect the USB cable of the CM3PVR and turn the CM3PVR off with the switch on the back side. 2. Updating the firmware Connect the CM3PVR to your TV and set the power switch on the backside of the CM3PVR to the ‘I’ position.
- Page 5 E. Checking the firmware version of the CM3PVR Connect the CM3PVR to your TV and set the power switch on the backside of the CM3PVR to the ‘I’ position. Turn the CM3PVR on (with the remote control). When the CM3PVR is in the main menu, press ‘RECORD’ – ‘0’ – ‘0’ – ‘0’ (zero) on the remote control.
- Page 6 After record, when entering standby mode, the blue LED stays lighted and the device cannot be turned on with the remote control. After record, the blue LED stays on while there is no image on the display. The CM3PVR cannot be turned off.
- Page 7 CM3PVR Version 053: Fixed: MP3 files showing a total time of 00. • Changed the way the date is shown with the CM3PVR. • It was MM-DD-YYYY it now is DD-MM-YYYY. Files are correctly sorted. •...
- Page 8 Fixed: Glitches during recordings, making the image of the recording appear distorted for a couple of • seconds. Some AVI files cause the CM3PVR to freeze or crash when being selected in the Media Browser. • ® Copyright 2008 by Conceptronic – All rights reserved www.conceptronic.net...
- Page 9 Fixed Lipsync Issue (2 • CM3PVR Version 039 BETA: Added: Scrolling filenames in Movie/Music/Photo browser when the filename is too long. • Fixed: Fixed Lipsync Issue (1 • ® Copyright 2008 by Conceptronic – All rights reserved www.conceptronic.net Page 9 of 10...
- Page 10 Improved boot-time. Boot time is now less than 15 seconds, instead of 45 seconds. • Note: When you have copied data from your PC to the CM3PVR, the CM3PVR needs to rebuild the database. This will cause a longer boot-time (+/- 40 seconds). This occurs once after each PC connection.
Need help?
Do you have a question about the CM3PVR and is the answer not in the manual?
Questions and answers