Conceptronic CM3PVRD How-To
  1. Manuals
  2. Brands
  3. Conceptronic Manuals
  4. Media Player
  5. cm3pvrd
  6. How-to

Conceptronic CM3PVRD How-To

Record from embedded dvb-t tv tuner
Hide thumbs Also See for CM3PVRD:
1
2
3
4

Advertisement

Table of Contents

How to Record from embedded DVB-T TV tuner with Conceptronic CM3PVRD
This how to document describes how you can connect and use your CM3PVRD to record digital channels from
a TV with embedded DVB-T tuner (from now on it will be referred to in this document as TVDVB-T).
ATTENTION:
This feature can only be used in certain TV models, not all TV models will allow you to
record from an embedded DVB-T tuner. Please refer to your TV manufacturer's manual
about this.
Important
As mentioned before not all TVs with embedded DVB-T tuner have the needed connections to allow the
CM3PVRD to record digital channels.
It's mandatory that your TV have some kind of video output to allow the CM3PVRD to record digital channels.
It could happen that the video output from your TV is just an analog tuner signal instead of DVB-T. If so,
please check with your TV manufacturer for a correct configuration.
Please check if your TV has a video output available in the TV manufacturer's manual.
Follow the next steps to watch and record digital channels from the TV embedded DVB-T tuner with your
CM3PVRD.
Step 1: Connecting TVDVB-T to Conceptronic CM3PVRD
We will use a composite cable (yellow, white, red) and RCA to SCART adaptor. These cables are included
with your CM3PVRD.
®
Copyright
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CM3PVRD and is the answer not in the manual?

Questions and answers

Related Manuals for Conceptronic CM3PVRD

Summary of Contents for Conceptronic CM3PVRD

  • Page 1 CM3PVRD to record digital channels. It’s mandatory that your TV have some kind of video output to allow the CM3PVRD to record digital channels. It could happen that the video output from your TV is just an analog tuner signal instead of DVB-T. If so, please check with your TV manufacturer for a correct configuration.
  • Page 2 Make sure that the RCA to SCART adaptor is set to OUTPUT mode. Step 3: Connecting Conceptronic CM3PVRD to TV Refer to chapter 6 (“Connecting the CM3PVRD”) in the CM3PVRD manual on how to connect the CM3PVRD to your TV.
  • Page 3 Instant recording (One Touch Record) 1. Press button ‘4’ on the remote control of the CM3PVRD or select the ‘AV input’ icon from the CM3PVRD menu. When the TVDVB-T tuner is on, you will see the video from the embedded DVB-T tuner on your TV.
  • Page 4 Note: Do not use the switch on the back of the CM3PVRD to turn off the device, since it will not be able to turn on itself when a recording needs to be started. The device always needs to be in stand-by mode when a recording is scheduled.

Table of Contents