Conceptronic CM3PVRD Firmware Upgrade Instructions
Tuner firmware upgrade
Hide thumbs
Also See for CM3PVRD:
- User manual (272 pages) ,
- How-to (4 pages) ,
- Firmware upgrade instructions (7 pages)
Advertisement
Conceptronic CM3PVRD – Tuner Firmware Upgrade Instructions
A. Suitable devices
This tuner firmware upgrade is only suitable for Conceptronic CM3PVRD.
Note:
This tuner firmware upgrade is not suitable for the Conceptronic CM3PVR, CM3PVRL and
CM3PVRN.
®
Copyright
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 6
Advertisement
Table of Contents
Related Manuals for Conceptronic CM3PVRD
Summary of Contents for Conceptronic CM3PVRD
- Page 1 Conceptronic CM3PVRD – Tuner Firmware Upgrade Instructions A. Suitable devices This tuner firmware upgrade is only suitable for Conceptronic CM3PVRD. Note: This tuner firmware upgrade is not suitable for the Conceptronic CM3PVR, CM3PVRL and CM3PVRN. ® Copyright 2009 by Conceptronic – All rights reserved www.conceptronic.net...
- Page 2 B. Upgrade information A firmware upgrade can improve the performance of your Conceptronic device and can sometimes add new features. Periodically firmware upgrades will be available via the official Conceptronic Website. Conceptronic is not liable for any damages caused by an unofficial, not by Conceptronic approved firmware for this specific Conceptronic device.
- Page 3 ‘F:\DTVTUNER.BIN’ where F:\ is your USB stick or memory card). Note: Do NOT put the firmware file in a folder on your USB stick or memory card. The CM3PVRD must ‘see’ the firmware file directly on the USB stick or memory card.
- Page 4 Select ‘DELETE’ in the onscreen menu and press the ‘ENTER’ button on the remote control. The CM3PVRD will ask if you are sure to delete the file. Select ‘Yes’ and press the ‘ENTER’ button on the remote control. The firmware file will now be erased from your hard disk.
- Page 5 E. Checking the tuner firmware version of the CM3PVRD Connect the CM3PVRD to your TV and turn the CM3PVRD on with the switch on the back. When the CM3PVRD is in the main menu, press ‘RECORD’ – ‘0’ – ‘0’ – ‘0’ (zero) on the remote control.
- Page 6 CM3PVRD tuner firmware – version 020: Fixed: Loop issue. Dual audio issue with DVB-T broadcastings. Added: Last watched DVB-T channel will now be remembered when turning off the CM3PVRD. CM3PVRD tuner firmware – version 019: Initial release. ® Copyright 2009 by Conceptronic – All rights reserved www.conceptronic.net...
Need help?
Do you have a question about the CM3PVRD and is the answer not in the manual?
Questions and answers