Conceptronic Media Giant CM3G Series Firmware Recovery Instructions

Conceptronic Media Giant CM3G Series Firmware Recovery Instructions

Advertisement

Conceptronic Media Giant Firmware Recovery Instructions
A. Recovery information
By using this recovery your Media Giant will be recovered to firmware version 1.00.07. After the recovery has
completed you can use the regular firmware upgrade method again to upgrade to a more recent version.
This firmware recovery is suitable for the following Media Giant models:
CM3G
[ C08-130 ]
− − − −
CM3GP
[ C08-131 ]
− − − −
CM3GPP
[ C08-132 ]
− − − −
for CM3G Series
: Media Giant
: Media Giant Plus, with analog tuner
: Media Giant Pro, with analog tuner and Powerline adapter
®
Copyright
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Media Giant CM3G Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Conceptronic Media Giant CM3G Series

  • Page 1 : Media Giant Plus, with analog tuner − − − − CM3GPP [ C08-132 ] : Media Giant Pro, with analog tuner and Powerline adapter − − − − ® Copyright 2008 by Conceptronic – All rights reserved www.conceptronic.net Page 1 of 2...
  • Page 2 Note: By recovering the firmware all settings are erased, so you have to reconfigure the Media Giant after the recovery has completed. The hard disk will not be erased, so the data remains intact. ® Copyright 2008 by Conceptronic – All rights reserved www.conceptronic.net Page 2 of 2...

This manual is also suitable for:

Media giant cm3gMedia giant cm3gpMedia giant cm3gpp

Table of Contents