Clearing Data - Monarch 9855 Application Notes

Clearing Data

The printer keeps track and stores the following items that can only be
cleared when you select "Yes" to clear data:
The number of RFID tags successfully programmed.
♦
The number of RFID tags that failed programming.
♦
Depending on your application and volume of labels printed, you may
want to clear this data daily or after each batch.
To change the setting, from the Main Menu, select Setup, then RFID.
Then follow these steps.
Press ! or " until you see
1.
RFID SETUP
! Clear Data?
2. Press Enter/Pause.
Are You Sure?
No
3. Press ! or " to see the other option. After you display the option
you want, press Enter/Pause.
If you select "Yes," all data collected since the last time it was
cleared is erased.
If you select "No," no data is erased.
4. Press Escape/Clear until you see the Main Menu.
2-8 HF Application Notes
"
"