Brinkmann Hampton Owner's Manual page 26

Step 12
Press the two raised points on the
back of the bezel into the
corresponding holes on the side
burner front panel. Then, firmly seat
the valve nozzle into the burner
venturi. Hold in place while you
perform Step 13
Step 13
Insert the two screws that are
already attached on the side burner
valve through the corresponding
key holes on the side burner front
panel and bezel, from the back of
the side burner front panel.
Depending on the side burner
valve, you will be using either the
outside key holes (Figure 1), or the
inside key holes (Figure 2). Pull the
valve downward or upward to lock
into place. Then tighten the two
screws.
Warning: Never use your grill
without leak testing
all gas connections
and hoses. See the
section on "Leak
Testing" in this
manual for proper
procedures.
Step 14
Place the side burner grate on the
side burner. Install the side burner
control knob onto valve stem.
25
Side Table Holes
Side Burner
Valve
Valve
Nozzle
Figure 1
Burner Venturi
Figure 2
Side Burner
Grate
Side Burner
Knob