Side Burner
Igniter Lead
Wind Deflectors
Grease Cup
Electrode
Warming Rack
Cooking Grills
Heat Distribution
Plates
Grooves
Step 15
Attach side burner igniter lead
wire to the electrode as
illustrated.
Step 16
Place the heat distribution plates
on lower level of grill body
assembly directly above burners.
Step 17
Place cooking grills on support
ribs directly above heat
distribution plates.
Step 18
Place the warming rack on the
grooves of the firebox side
panels so that it sits above the
cooking grills.
Step 19
Loosen pre-attached bolts
located on back of the grill
assembly. Place wind deflectors
over pre-attached bolts, and
slide down to lock into place.
Tighten bolts securely.
Step 20
Hang grease cup from brackets
underneath backside of grill.
26