Brinkmann Hampton Owner's Manual page 24

Note: When performing Step 6, lift
grill body from front and rear
panels to avoid injury to
hands and fingers.
Step 6
With the help of a friend, place grill
body assembly on grill cart. Secure
using four M6 X 12 mm bolts
(black) and M6 star washers (black)
on each side of the frame.
Step 7
Insert the two bolts with pre-
attached nuts on the left side table
into the key holes on the side table
front panel. Tighten the nuts with
wrench. Insert one M6 X 12 mm
bolt (black) from side table to side
table front panel.
Step 8
Attach hooks to side table towel
rack bar. Then attach towel rack
bar to side table using two
M6 X 12 mm hexagonal bolts
(silver) and M6 spring washers
(silver).
23