LG LKD1000 Owner's Manual page 18

Changing to Picture at Preset Position
The following function is available only with cameras
provided with the preset function.
The preset function makes the camera move to the
programmed preset position.
It is necessary to program preset positions for the
camera beforehand.
1. Select the [PRESET] icon and press ENTER.
The sub menu will appear.
2. Select [Go to Preset] option then press ENTER.
The sub menu will appear.
3. Use number buttons to enter the memorized pre-
set position's index number then press ENTER.
The camera moves to the preset position and the
picture of the camera in that position appears on
the monitor.
18
To tour the preset positions
You can tour all preset positions.
1. Select the [PRESET] icon and press ENTER.
The sub menu will appear.
2. Select [Tour] option then press ENTER.
The sub menu will appear.
3. Press ENTER.
All registered preset positions in the camera will
be selected, and the camera position image will
be displayed on the active monitor.
4. Move the joystick to stop the tour.
Note:
After executing Preset Touring, Group Touring, Run
Auto Panning or Play Pattern operation, the ongoing
operation has to be stopped by moving the joystick
before executing any other operation. Failure to do
this can make the target camera not working as
intended.