Appearance; Led Indicator; Button And Port - Tenda i12 User Manual

1.3

Appearance

1.3.1

LED Indicator

LED Indicator
System indicator
1.3.2

Button and Port

 Reset button
After the AP is powered on, you can hold down this button for 8 seconds to restore the factory
settings.
 RJ45 port
This port is used to connect to a PoE power supply and exchange data.
Model
i12
Status Description
Solid on The system is booting or faulty.
Blinking The system is running properly.
Off The system is powered off or the LED indicator is turned off.
Rate
10/100/1000 Mbps auto
negotiation
System indicator
RJ45 port
Power jack
Reset button
Connection Description
If the AP is powered using a DC adapter,
connect this port to a switch. If the AP must be
powered through PoE, connect this port to an