Removing The Hearing Instrument; Recognizing Left & Right Instrument; User Operated Controls - ReSound Sparx Lite SL90-V Operating Instructions Manual

Super power bte
Table of Contents

Advertisement

REMOviNg THE HEaRiNg iNSTRuMENT

To remove the hearing instrument, simply pull the tube
outward with your thumb and forefinger. Consult your
hearing care professional if you have difficulty remov-
ing the hearing instrument.
RECOgNiziNg LEfT aNd RigHT iNSTRuMENT
If you have two hearing instruments, they may be set
differently for your right and left ears. Do not switch the
hearing instruments without consulting your hear ing
care professional. If you detach the ear moulds from
the hearing instruments when cleaning and/or storing
them, verify that you have connected the ear moulds
to the appropriate hearing instrument before fitting
them to your ears.
To properly identify your left instrument from your
right you should see an indication just above the Push
button (see page 10), that designates which ear the
instrument is for. L is for Left and R is for Right.
Left
8
Right
uSER-OPERaTEd CONTROLS
volume control
Volume is adjusted by means of a conveniently located
rotary control marked from »1« (minimum level) to »4«
(maximum level).
Setting the volume
Your instrument has a vo-
lume control which allows
you to set and control the
volume manually.
At the hearing instrument
fitting, your hearing care
practitioner will choose an
optimal volume setting for
you. Please note the setting of that particular level.
Your volume control has numbers on it to indicate how
loud the hearing instrument is set.
• If you prefer not to use the volume wheel your
hearing care professional can disable this feature.
9

Advertisement

Table of Contents
loading

Table of Contents