Removing The Hearing Instrument; Recognizing Left & Right Instrument; User Operated Controls - ReSound Danalogic 6 6090 SP User Manual

Table of Contents

Advertisement

REMOvING THE HEARING INSTRUMENT

To remove the hearing instrument, simply pull the
tube outward with your thumb and forefinger.
Consult your hearing care professional if you have
difficulty removing the hearing instrument.
RECOGNIzING LEfT AND RIGHT INSTRUMENT
if you have two hearing instruments, they may be
set differently for your right and left ears. do not
switch the hearing instruments without consulting
your hearing care professional. if you detach the
ear moulds from the hearing instruments when
cleaning and/or storing them, verify that you have
connected the ear moulds to the appropriate hear-
ing instrument before fitting them to your ears.
To properly identify your left instrument from your
right you should see an indication just above the
Push button (see page 10), that designates
which ear the instrument is for. l is for left and r
is for right.
left
8
USER-OPERATED CONTROLS
volume control
volume is adjusted by means of a conveniently lo-
cated rotary control marked from »1« (minimum
level) to »4« (maximum level).
Setting the volume
your instrument has a volume control which al-
lows you to set and control the volume manually.
at the hearing instru-
ment fitting, your hear-
ing care practitioner will
choose an optimal vo-
lume setting for you.
Please note the setting
of that particular level.
your volume control has
numbers on it to indicate how loud the hearing
instrument is set.
• if you prefer not to use the volume wheel your
right
hearing care professional can disable this fea-
ture.
9

Advertisement

Table of Contents
loading

Table of Contents