Table of Contents
Advertisement
C
Select the language.
Press OK. The Language Set
display appears on the TV
screen.
rt
Press
to move the
highlight bar (pointer) to the
language of your choice.
(Example) DEUTSCH is selected.
D
Set the date and time.
Press OK. The Clock Set
rt
screen appears. Press
set the time, then press OK or
e
. The "DATE" display
begins blinking. Repeat the
same procedure to set the
date and year.
When you set the time, press and hold
time by 30 minutes.
When you set the date, press and hold
date by 15 days.
E
Perform Auto Set Up.
Press OK.
"Auto" blinks on the front display panel; do NOT press
any button on the recorder or remote control.
If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
q
Set Up progresses, the "
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, "SCAN
COMPLETED" appears for
about 5 seconds, then the
normal screen appears.
to
rt
to change the
rt
to change the
"
Beginning
ATTENTION
Once you have performed Auto Set Up, even if the recorder's
memory backup has expired, all the stored stations remain in
the recorder's memory and the recorder will not perform
Auto Set Up again. You only need to set the clock.
(
pg. 29)
If you have moved to a different area, perform each setting as
required.
Video channel setting (for RF connection users)
Tuner setting
Clock setting
If a new station starts broadcasting in your area, perform
tuner setting (
setting (
pg. 34).
NOTES:
If there is a power cut, or if you press
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1.
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(
pg. 32, "INFORMATION").
End
pg. 30
pg. 29
pg. 30) and, if necessary, video channel
1
or MENU while Auto
9
EN
pg. 34
Advertisement
Table of Contents
