Table of Contents
Advertisement
IMPORTANT
Your video recorder memorizes all detected stations even if
reception of some of them is poor. You can delete those
stations with an unacceptable picture (
Channel").
NOTES:
Fine tuning is performed automatically during Auto Channel
Set. If you want to perform it manually, refer to page 33.
If you perform Auto Channel Set when the aerial cable is not
connected properly, "SCAN COMPLETED -NO SIGNAL-"
appears on the TV screen in step 7. When this happens, make
sure of the aerial connection and press OK; Auto Channel Set
will take place again.
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(
pg. 32, "INFORMATION").
F
Press OK.
G
After "SCAN COMPLETED" is
displayed on the TV screen for
about 5 seconds, the
Confirmation screen looking
like the one to the right
appears. The stations your
recorder located appear on a
Confirmation screen —
channel positions (PR) and
frequency (FRQ). The blueback screen and the
programme currently being broadcast by the blinking
station appear alternately for 8 seconds each. To view the
next page, use the
H
Press MENU.
pg. 32, "Delete A
Perform Auto Channel Set.
The Auto Set screen appears,
and remains on screen while
the recorder searches for
receivable stations.
As Auto Channel Set
q
progresses, the "
" mark on
the TV screen moves from
left to right. Wait until the TV
screen as shown in step 7
appears.
View the Confirmation screen.
rt
button on the remote control.
The stations located in the selected country appear at the top
of the list.
If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE for the country setting
(
pg. 8, 11), refer to "INFORMATION" on page 32.
Return to the normal screen.
Using the Confirmation screen, you can delete channels, swap
channel positions and fine-tune channels already stored. Refer
to pages 32 – 33 for the procedures.
31
EN
Beginning
End
Advertisement
Table of Contents
