Table of Contents
Advertisement
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
w
e
2
6
Press
or
(
or
displayed on the TV screen and search begins in the
corresponding direction.
● To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
Current position
● When the specified index code is located, playback begins
automatically.
Skip Search
During playback, press 30 SEC 1 to 4 times to skip over
unwanted sections. To resume normal playback, press
● Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
2
6
). "
1" or "
1" is
w
e
or
repeatedly
Index number
Next Function Memory
The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
3
Press
, then press
b- For Automatic Power Off
3
Press
, then press
c- For Automatic Timer Standby
3
Press
, then press
Repeat Playback
Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
w
4
Press
.
e
2
Activate Repeat Playback.
4
Press
and hold for over 5 seconds, then release.
● The Play indicator (
slowly.
● After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
8
Press
at any time.
4
3
● Pressing
,
4
.
4
within 2 seconds.
1
within 2 seconds.
#
(TIMER) within 2 seconds.
$
) on the front display panel blinks
5
9
,
or
also stops Repeat Playback.
15
EN
Advertisement
Table of Contents
