Swap Channel Positions; Fine-Tuning Channels Already Stored - JVC HR-J278EU Instructions Manual

Swap Channel Positions

Example: To swap PR 03 and PR 09.
A
Access the Main Menu screen.
Press MENU.
B
Access the Confirmation screen.
rt
Press to move the highlight bar (pointer) to
"MANUAL CH SET", then press OK or
Confirmation screen appears.
C
Select the position. (e.g. 03)
rt
Press until the section of
PR "03" begins blinking,
e
then press OK or .
● Only "03" will blink.
D
Select the position. (e.g. 09)
Press NUMBER keys to input
"0" and "9". The two
selected channels will be
swapped.
● To cancel the channel swapping, press
● Repeat steps 3 and 4 as necessary.
E
Close the Confirmation screen.
Press MENU.
e
. The
w
.

Fine-Tuning Channels Already Stored

A
Access the Main Menu screen.
Press MENU.
B
Access the Confirmation screen.
rt
Press to move the highlight bar (pointer) to
"MANUAL CH SET", then press OK or
Confirmation screen appears.
C
Select the channel to fine-tune.
rt
Press until the channel
you want to tune begins
blinking, then press OK or
twice.
D
Perform tuning.
rt
Press until the picture is
its clearest. Then press OK.
● Repeat steps 3 – 4 as
necessary.
E
Close the Confirmation screen.
Press MENU.
EN
e
. The
e
33