Table of Contents
Advertisement
REW
High-Speed Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback
resumes.
Downloaded from:
https://www.usersmanualguide.com/
REW
1
1
2
3
2
4
5
6
7
8
9
0
4
••
••
PUSH JOG
3
Index Search
Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
START SEARCH
1
While the tape is stopped, press PUSH JOG ™ or
£ ( or ).
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
PUSH JOG ™ or £ (
correct number is displayed on screen (only if SUPERIM-
POSE is set to ON (
automatically when the desired recording is located.
● If necessary press REW or FF when play starts to
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
Manual Tracking
CH
Once playback begins, the VCR's automatic tracking function is
engaged. If tracking noise appears in the picture, you can
override this and make the adjustment manually.
FF
ENGAGE MANUAL
TRACKING MODE
1
During playback, press the CH5 and ∞ buttons on the
VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.
ADJUST MANUAL
TRACKING
2
Press CH 5 or ∞ on the VCR's front panel or remote.
Press briefly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATIC
TRACKING
3
Press the CH5 and ∞ buttons on the VCR's front panel
simultaneously.
● When automatic tracking is re-engaged, Video
NOTES:
● To obtain a noiseless still picture it may be necessary to adjust
tracking in slow playback and then engage Pause.
● Manual tracking is possible during hands-free slow-motion.
During hands-free slow-motion playback, simply press CH 5
or ∞ on the VCR's front panel or remote to adjust tracking.
or
pg. 20). Playback begins
search visually to find the very beginning of the
desired program.
Calibration is automatically activated.
17
EN
) repeatedly until the
Advertisement
Table of Contents
