Table of Contents
Advertisement
Choosing A Location
• The unit should be located in an area where it is easy to see
the visual display and lighted ringer.
• Choose a location that is out of the way of normal activities.
Adapter Installation
You can also insert the adapter for the LCD display, and you must
insert the adapter for LCD back light and other special functions,
please refer to the concrete requirement in the manual.
CAUTION: Always connect the AC adapter to the phone before
you connect it to the AC power. When you finish, disconnect the
AC power before you disconnect it from the telephone.
Connecting Line Cords
1. Plug one end of the supplied modular cord into the line jack.
Then plug the other end into telephone line jack.
2. Insert the end of the shaker line into the
Note: You can also use the phone to make or receive a call
without inserting an adapter.
Night Light Function
If you move the back light switch (
side of the phone to
bright so your phone can also be used as a night light.
INSTALLATION
position, the LCD back light will be always
10
socket.
) located on the right
Advertisement
Table of Contents
